OPTIONAL EQUIPMENT
Relative Positioning Bracket
Allows the marking head to align and position accurately with the surface
to be marked. Each bracket is machine model specific.
Four-way Valve
Shifts air flow in air cylinder.
Flow Controls
Controls exhausted air while providing full flow in opposite direction
allowing smooth controlled marking head movement.
Hall / Reed Switch
A magnetic hall or reed switch can be mounted on the air cylinder to
sense position. All models (except 22/28/44/416) have a magnent on piston
cylinder feature standard. Models 44 / 416 can have a magnent on piston
feature added to the air cylinder as an option.
Micro-Pilot Switch
Switch that detects end of stroke travel of the air cylinder for those
applications where this could be beneficial (e.g. varying marking surface
heights). This switch can also be used as a return signal.
Signaling Device
PLC, proximity switch, photcell, mechanical trigger switch, etc., that provides momentary
signal to the four-way valve to cycle marking machine. Due to the magnitude of options
possible customer determines and supplies seperately.
Rubber Type and Molded Messages
Rubber type size upto 1/4" high and smaller molded
messages are made with two ribs on back to be secured
in the type holder. Larger type size and larger molded
messages may contain more ribs on back reducing
lines of type or message that can be installed in a fixed
area (consult Sprinter for more details). Optional rubber
type kits: Number (8-10 each number),
Letter/Number (2-6 each character),
Date Code (01-12, 01-31, and 2 digit year),
Individual Characters (50 each).
Specify kit type and character size. Supply artwork for
molded message quote (5 per package).
