BENCHTOP UNIT
Any Sprinter machine model (with either bracket) may be mounted to the benchtop
base unit. A benchtop unit ordered with an appropriate Sprinter model and mounting
bracket provides a ready-to-run system requiring only air and electric hookup to start
code-marking operations. Normally the benchtop system is used for off-line marking
of packages or products. The easily relocated sliding guides allow quick repositioning
of the product to be marked. The micro-pilot switch provides for immediate marking
head retraction after the marking impression is made. The unit can be cycled by foot
or hand operation. The benchtop system minimal weight (12 lbs. with model 66)
makes it highly portable.
| Model |
22 |
44 |
66 |
88 |
1010 |
416 |
616 |
816 |
|---|---|---|---|---|---|---|---|---|
| X
Dim |
4
1/4" |
4
1/4" |
4
1/4" |
4
1/4" |
4
1/4" |
4
1/4" |
4
1/4" |
4
1/4" |
| Y Dim |
2 1/2" |
3" |
3 1/2" |
3 3/4" |
3 3/4" |
3 5/16" |
3 5/8" |
3 3/4" |
| Z Dim |
5 1/4" |
4" |
4" |
4" |
4" |
4" |
4" |
4" |
X Dim = Maximum distance from centerline of marking head to side positioning edge.
Y Dim = Maximum distance from centerline of marking head to rear positioning edge.
Z Dim = Maximum distance
from centerline of marking head to bottom positioning edge.
