- Can white inks be used? Yes, along with a wide variety of standard ink colors.
- Can Sprinter models be used to mark on non-porous
surfaces? Yes, as well as porous surfaces of
varying consistency.
- Are the inks used in Sprinter models quick drying? Yes, generally within 1 - 2 seconds dry-to-touch on most
non-porous surfaces, quicker on porous surfaces.
- Do you offer optional equipment? Yes, a range of auxiliary equipment as well as operating
supplies are stocked for overnight delivery if needed.
- Can Sprinter models do upside down marking? Any orientation is possible; if an orientation requires the
ink to feed against gravity, a wick is used in the reservoir to assist ink flow.
- What size of rubber type can be used? A range of type heights typically from 1/16" to
1/4" is common, other sizes can be used.
- Are Sprinter models available for engineering
evaluation? Yes, consult your representative for
details.
- What are typical delivery terms? Most items are shipped on a 7 to 10 day basis; however,
overnight service is also available on all standard machines, auxiliary equipment, as well
as operating supplies.
- Can Sprinter models mark on non-flat surfaces? In some cases non-flat surfaces can be accomodated. .
.consult your representative for details.
|
1805 Chandlersville Rd.
Zanesville, Ohio 43701
740-453-1000 Fax: 740-453-6750
info@sprintermarking.com
Copyright © 1999 Sprinter Marking, Inc.
[Products] [Technical
Data] [Company Profile] [FAQ] [Contact Us] [News] |
